- Physicom Corp.
- Measurement & Control Solutions
Physicom Corp. has a wide selection of signal conditioners, amplifiers and isolators to meet your application requirements. All signal type from strain gage to lvdt, pententiometer to accelerometer, voltage to current loop, we have solutions ideal for single channel to large channel count measurement systems.
9235
- Strain Gauge Input Amplifier
- Accuracy: < 0.10%
- In-Line Amplifier
- Aluminum Housing
- Protection Class: IP40 (IP65 Option)
- Space saving, lightweight
- Non-interchangeable and short circuit-proof
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±10 V DC |
| Max Bandwidth | 1 kHz |
| Excitation | 2.5 V DC |
| Isolation | No |
LCV
- High Accuracy
- Direct Connection to PLC
- Long Input Lead Possibility from LCV to Evaluation
- Voltage or Current Output
- Integrable in large Sensors as Board
- High Level of Protection IP67
- Tube housing; IP67
- Linearity; 0.02% F.S.
- Solder terminals
- Low temperature drift
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
| Max Bandwidth | 1 kHz |
| Excitation | 5 V DC |
| Isolation | No |
SI
- High Accuracy
- Voltage or Current Output
- Direct Connection to PLC
- Long Input Lead from SI to Evaluation possible
- Applicable in heavy Industries by robust Aluminum Casting Housing
- High Level of Protection IP66
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 5 kHz, 10 kHz |
| Excitation | 5 V DC, 10 V DC |
| Isolation | No |
9243
- Strain Gauge & Potentiometer Input Amplifier
- 50 V Continuous Isolation
- Accuracy: ± 0.05%
- DIN Rail Mounted
- In-Line Amplifier (Option)
- Aluminum Housing
- Protection Class: IP40
| Input Type | ±10 V DC, Potentiometer, Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 4 kHz |
| Excitation | 2.5 V DC, 5 V DC, 10 V DC |
| Isolation | Yes |
9221
- Universal Sensor Input Module
- Accuracy: < 0.03%
- DIN Rail Mounted Module
- Aluminum Housing
- Protection Class: IP20 (IP65 Option)
| Interface | RS-232 |
| Input Type | ±10 V DC, Potentiometer, Strain Gauge |
| # of Inputs | 1 |
| Output Type | Profibus |
| Max Bandwidth | 2 kHz |
| Excitation | 2.5 V DC, 5 V DC, 10 V DC |
SI-RS485
- High Accuracy
- Fast Measurement of up to 5000 Measurements/s
- Optional 2 Channel Type with 0.3…3 mV/V or +5 V Input
- Fail-safe by digital Interface
- Adjustment and Control Signal Switch via Software
- Adjusted values in EEPROM logged
- Long Input Lead from SI/RS485 to Evaluation possible
- Applicable in heavy Industries by robust Aluminum Casting Housing
| Input Type | Strain Gauge |
| # of Inputs | 1, 2 |
| Output Type | RS-485 |
| Max Bandwidth | 2.5 kHz, 5 kHz |
| Excitation | 5 V DC |
| Isolation | No |
9236
- Strain Gauge Input
- 50 V Continuous Isolation
- Accuracy: 0.10%
- Multi-Channel up to 4 Inputs
- Aluminum Housing
- Available as Open Circuit without Housing
- Simple configuration using DIP switch
- Protection Class: IP20 (IP67 Option)
| Input Type | Strain Gauge |
| # of Inputs | 1, 2, 3, 4 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| Max Bandwidth | 1 kHz |
| Excitation | 2.5 V DC |
| Isolation | No |
GM40
- High Accuracy
- For Switch Cabinet Assembly, Width 23 mm, only
- Direct Connection to PLC
- Long Input Lead from GM 40 to Evaluation possible
- Easy to operate
- Voltage or Current Output
- DIN Rail Mount
- Rating: IP20
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 5 kHz, 10 kHz |
| Excitation | 5 V DC, 10 V DC |
| Isolation | Yes |
GM42
- For Switch-Cabinet Assembly, Width only 23 mm
- Min.-Max. Memory Device Extension to GM 40
- 10...30 V DC Supply, galvanically separated
- Very easy Operation
- Each one Reset Input via Opto Couplers
- Fast Rise Time <0.2 ms
- Voltage Input 0-10 V
| Input Type | ±10 V DC |
| # of Inputs | 1 |
| Output Type | ±10 V DC |
| Max Bandwidth | 5 kHz |
| Isolation | Yes |
| Supply Power | 10 - 30 V DC |
GM62
- 10...30 V DC Supply, Galvanic Separation
- For Switch-Cabinet Assembly, Width 23 mm only
- Sensor Excitation 6...10 V adjustable
- Voltage Output 0...+/-10 V
- 2 Parallel Sensor Connections
- Direct Connection to PLC
- External Control
- Very Easy Operation
- Abatable Clamps
- DIN Rail Mount
- Rating: IP 21
| Input Type | Strain Gauge |
| # of Inputs | 2 |
| Output Type | ±10 V DC |
| Max Bandwidth | 1 kHz |
| Excitation | 6 - 10 V DC |
| Isolation | Yes |
